1.0.4.9 signal problem

[cengizhan]

there are some channels with no signal which worked with 1.0.4.8.

example : turksat 3a, 11064mhz,v,13000

[steven]

Hi
1.0.4.9 is designed to solve sleep problem,if you have not the sleep problem ,you can still use 1.0.4.8.
and for this problem we will check it ,thanks.

[Golf520v]

The signal problem not only on Turksat 2a/3a same problem showed up on Hellassat 2 39 E for example 11512 H 30000, 11052 V 30000, 11473 H 2893, not worked with New version 1.0.4.9. When i back up to old version of driver 1.0.4.8 everything working fine

[steven]

The signal problem not only on Turksat 2a/3a same problem showed up on Hellassat 2 39 E for example 11512 H 30000, 11052 V 30000, 11473 H 2893, not worked with New version 1.0.4.9. When i back up to old version of driver 1.0.4.8 everything working fine

Hi
Would mind to tell me what's your LNB type,and which player you are using?
Thanks

[Golf520v]

The signal problem not only on Turksat 2a/3a same problem showed up on Hellassat 2 39 E for example 11512 H 30000, 11052 V 30000, 11473 H 2893, not worked with New version 1.0.4.9. When i back up to old version of driver 1.0.4.8 everything working fine

Hi
Would mind to tell me what's your LNB type,and which player you are using?
Thanks

My Lnb is Inverto Quad Flange LNB for four receivers and my DVB Player is DvbDream 1.5e reg. I change output 1 witch going to tbs 6920 from LNB output to 2,3,4. Even when only tbs 6920 is connected to LNB on different output port result was the same no signal. When i back-up to old driver 1.0.4.8 TBS 6920 is working fine with all port on LNB with or without other sat. receiver.

[steven]

The signal problem not only on Turksat 2a/3a same problem showed up on Hellassat 2 39 E for example 11512 H 30000, 11052 V 30000, 11473 H 2893, not worked with New version 1.0.4.9. When i back up to old version of driver 1.0.4.8 everything working fine

Hi
Would mind to tell me what's your LNB type,and which player you are using?
Thanks

My Lnb is Inverto Quad Flange LNB for four receivers and my DVB Player is DvbDream 1.5e reg. I change output 1 witch going to tbs 6920 from LNB output to 2,3,4. Even when only tbs 6920 is connected to LNB on different output port result was the same no signal. When i back-up to old driver 1.0.4.8 TBS 6920 is working fine with all port on LNB with or without other sat. receiver.

would mind to give me a pic about your LNB setting's value with DVBdream,because microsoft BDA driver maybe send some wrong command,so i want to know what's your dvbdream LNB setting,and i will have a test.
Thanks

[Golf520v]

My dvb dream LNB settings is this http://img843.imageshack.us/i/lnbsettings.jpg/ my lnb model is this http://img847.imageshack.us/i/invquadfl500x500.jpg/ i hope i can help with this image to solve the problem with driver 1.0.4.9 regards.

[steven]

Hi
I have send a new driver to your email sfsio***@yahoo.com ,just check it ,thanks.

[Golf520v]

Hi
I have send a new driver to your email sfsio***@yahoo.com ,just check it ,thanks.

Thank u very much for that driver you send me its working very well. Great job

[steven]

Hi
I have send a new driver to your email sfsio***@yahoo.com ,just check it ,thanks.

Thank u very much for that driver you send me its working very well. Great job

You are welcome.
Thanks