Hi there!
I wonder Is it possible to either bring back the single DVB-C driver for the 6280?
This is because I noticed that the DVB-C driver for the 6285 allowed me to use settings of QAM56/6875 to tune to a H.264 channel, which allows it to be displayed on screen.
With the combined T/T2/C driver for 6280, the channel will appear black with no audio. I tried the old DVB-C driver for 6280 to input the settings of QAM56/6875 and it could work too, thus requesting the newer driver.
Or if it's possible, can also try to write the combined driver differently, so that the signals for DVB-C are not mapped to the DVB-T device. Instead, I recommend that 2 virtual devices (one for DVB-T/T2 and the other for DVB-C) be maintained in the driver implementation.
Thanks in advance.