milan58 Wrote:Hi.Your picture shows you have no signal.Increase the buffer for HD programs,look at my picture.
Thanks for the suggestion, I increased the buffer, but unfortunately it did not help, I already met the same situation only on the receiver vu solo, and so there a tick "high bitrate support" in cam module settings solved my problem. The most interesting is that not all HD channels work badly, some are good.
UPD: According to your advice, I tuned the antenna to a satellite a bit better, and everything works now, the problem is that the power differs slightly in different transponders, therefore some channels are shown normally and some are not. THANK YOU!