Tested CAMs which work with TBS 6928

[warumnix]

Hi All,

the same CAMs as listed here http://www.tbsdtv.com/forum/viewtopic.php?f=33&t=1420 also have been tested, and they work fine with the TBS 6928, if you've tested more another CAMs, welcome to post the result here, thanks.

[ncarlson]

Thanks warumnix. I'm pretty new at this, but I suppose since the diablo is on there that the Jolly CAM 1.01is supported too? Because I have been trying to get it to work, but it is on and off...running windows seven, and DVB Viewer Pro 4.9.0.0...

[steven]

Hi ncarlson

yes,of course. it should be ok.

Thanks

[Olli1984]

Hello,

I have a Unicam module, Rev. 2
Are there any experiences with this CAM?
I get in scrambled channels no picture and no sound.

[bob]

could you provide more detial about your situation? Which player you used? What CA card?
If you use it in windows,please try MCE tool to read the MMI menu,if it can read it,than 6928 could support your CAM.
And it will be other reason why it can't descramble the TV channel.

[herrbasan]

I've tested the Unicam Deltacrypt CAM with a Sky Germany V13 card with following software:

MediaPortal - Works
Windows Media Centre - Works
DVBLink - didn't work for me
DVBViewer - Works
DVBViewer Recoding Servive (works, with a tiny bug that is allready reported and is in progress of fixing)

All in all, in my experience the TBS CAM support is really really good. No artifacts, pretty fast response, and very reliable.

[Blaster]

I have also the Unicam 2 Deltacrypt CI Modul Hardware Rev. 2.0(FW Sparta 5.34) with a HD+Card and use DVBViewer Pro(4.9.6.20). But it doesn't work, any suggestions?

tahnks for help!