Some weeks ago, I updated the firmware to R2.0 V1.60, re-installed the DVB-C card firmware and setup tvheadend. I was able to successfully program the timer and make recordings.
Since one week, newly programmed timer recordings did not succeed, the debug system log of tvheadend shows:
- Code: Select All Code
Mar 08 18:27:22.000 Service: Subscription "DVR: ...(Title)...": Probing adapter "_dev_dvb_adapter0_TurboSight_TBS_6618_DVBC_frontend514000000" with weight 300 for service "TurboSight TBS 6618 DVBC frontend/M-net: 514,000 kHz/PHOENIX HD"
Mar 08 18:27:24.000 Service: Subscription "DVR: ...(Title)...": Adding adapter "_dev_dvb_adapter0_TurboSight_TBS_6618_DVBC_frontend514000000" for service "TurboSight TBS 6618 DVBC frontend/M-net: 514,000 kHz/PHOENIX HD"
Mar 08 18:27:24.000 Service: Subscription "DVR: ...(Title)...": Probing adapter "_dev_dvb_adapter0_TurboSight_TBS_6618_DVBC_frontend514000000" without stealing for service "TurboSight TBS 6618 DVBC frontend/M-net: 514,000 kHz/PHOENIX HD"
Mar 08 18:27:24.000 Service: Subscription "DVR: ...(Title)...": Unable to use "TurboSight TBS 6618 DVBC frontend/M-net: 514,000 kHz/PHOENIX HD" -- No hardware present
This output shows, the the respective DVB-C card has been already in use by the tvheadend installation and saved in its database, otherwise it wouldn't be able to search for it.
The very last message gave me the hint to check the dmesg for the TBS6618, and: I found no output that notes the DVB-C card. So I tried some modifications:
- Re-Install all drivers (sudo su, then goto install directory: cd /root/tbs/linux-tbs-drivers, finally make && make install), no success.
- Try all combinations of UEFI firmware for PCIe link speed: AUTO, GEN1, GEN2, GEN3 (see image attached). All of them with the TBS6618 in both PCIe slot #1 and afterwards in PCIe slot #2. No success.
Thanks in advance!