How to install the tbs cards driver for Raspberry Pi

[steven]

Hi all

Good news that we success compile the latest open source driver for Raspberry Pi

Raspberry Pi 3 Moel B+

new package for new kernel :
# wget https://www.tbsdtv.com/download/document/linux/media_build-rpi-2021-07-19.tar.bz2
# sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/
#tar jxvf media_build-rpi-2021-07-19.tar.bz2
#cd media_build
#./install.sh
#reboot

update package for the Raspbian on Raspberry Pi 4B (support kernel upto 5.4) package :
ttp://www.tbsdtv.com/download/document/linux/media_build-rpi-2020-01-02.tar.bz2

For kernel 5.4.79-v7+ please try this new package :
http://www.tbsdtv.com/download/document/linux/media_build-rpi-2020-10-14.tar.bz2

here is the detail steps please have a check

1.Download the latest Raspbian Image from the official website:
http://director.downloads.raspberrypi.org/raspbian/images/raspbian-2019-04-09/2019-04-08-raspbian-stretch.zip

detail install steps :

installsystemandlcd.pdf

Raspberry Pi system install

(24.09 KiB) Downloaded 2374 times

2.install the driver,the kernel we are using is :
root@raspberrypi:/home/pi# uname -a
Linux raspberrypi 4.14.98-v7+ #1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l GNU/Linux

1).download the kernel header file
#apt-get install raspberrypi-kernel-headers
2) download some soft
#apt-get install patchutils
#apt-get install libproc-processtable-perl
3) download offline TBS driver package:
#wget http://www.tbsdtv.com/download/document/linux/media_build-2019-04-15-rpi.tar.bz2
# sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/
#tar jxvf media_build-2019-04-15-rpi.tar.bz2
#cd media_build
#./install.sh
#reboot

after reboot it should load the TBS driver.
TBS5927:

RP-5927

rp-5927.png (9.59 KiB) Viewed 59015 times

TBS5922SE:

RP-5922SE

TBS5520SE

rp-5520se

if you have any issue you can leave message here .

Thanks

Kind Regards

steven

[drhans]

Unfortunately this does not work. I tried with RPI3 and fresh install of Raspbian stretch. Everything went fine until ./install.sh part. It ended with error and after reboot, TBS tuner (5922SE) was not recognized. Probably something with kernel headers. Either way, this tutorial is not working.

Code: Select All Code

File not found: /lib/modules/4.14.98-v7+/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.


Code: Select All Code

pi@raspberrypi:~/media_build $ sudo ./install.sh
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/cec/cec-api.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/media-device.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/v4l2-core/v4l2-ioctl.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/platform/s5p-mfc/s5p_mfc_debug.h.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/usb/em28xx/em28xx-dvb.c.rej
Applying patches for kernel 4.14.98-v7+
4 14 98
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/pci/ivtv/ivtvfb.c.rej
23 out of 23 hunks FAILED -- saving rejects to file drivers/media/v4l2-core/v4l2-compat-ioctl32.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/common/videobuf2/videobuf2-dma-contig.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/common/videobuf2/videobuf2-dma-sg.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/common/videobuf2/videobuf2-vmalloc.c.rej
1 out of 1 hunk FAILED -- saving rejects to file include/linux/dma-buf.h.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/v4l2-core/v4l2-fwnode.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/usb/cx231xx/cx231xx-i2c.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/usb/em28xx/em28xx-i2c.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/usb/tm6000/tm6000-i2c.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/pci/saa7164/saa7164-core.c.rej
2 out of 2 hunks FAILED -- saving rejects to file drivers/staging/media/zoran/videocodec.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/i2c/tda1997x.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/common/saa7146/saa7146_vbi.c.rej
1 out of 1 hunk FAILED -- saving rejects to file drivers/media/pci/tw686x/tw686x-core.c.rej
2 out of 2 hunks FAILED -- saving rejects to file drivers/media/usb/uvc/uvc_driver.c.rej
dvb-demod-avl6882.fw
dvb-demod-drxk-pctv.fw
dvb-demod-gx1503B.fw
dvb-demod-mn88472-02.fw
dvb-demod-mn88473-01.fw
dvb-demod-si2168-01.fw
dvb-demod-si2168-02.fw
dvb-demod-si2168-a20-01.fw
dvb-demod-si2168-a30-01.fw
dvb-demod-si2168-b40-01.fw
dvb-demod-si2183-b60-01.fw
dvb-fe-bcm3510-01.fw
dvb-fe-cx24116.fw
dvb-fe-cx24117.fw
dvb-fe-drxj-mc-1.0.8.fw
dvb-fe-drxj-mc-vsb-1.0.8.fw
dvb-fe-drxj-mc-vsb-qam-1.0.8.fw
dvb-fe-ds3000.fw
dvb-fe-ds300x.fw
dvb-fe-ds3103.fw
dvb-fe-mxl5xx.fw
dvb-fe-or51132-qam.fw
dvb-fe-or51132-vsb.fw
dvb-fe-or51211.fw
dvb-fe-rs6000.fw
dvb-fe-tda10045.fw
dvb-fe-tda10046.fw
dvb-fe-tda10048-1.0.fw
dvb-fe-tda10071.fw
dvb-fe-xc4000-1.4.1.fw
dvb-fe-xc5000-1.6.114.fw
dvb-fe-xc5000c-4.1.30.7.fw
dvb-tuner-si2158-a20-01.fw
dvb-usb-avertv-a800-02.fw
dvb-usb-bluebird-01.fw
dvb-usb-dib0700-1.20.fw
dvb-usb-dibusb-5.0.0.11.fw
dvb-usb-dibusb-6.0.0.8.fw
dvb-usb-dtt200u-01.fw
dvb-usb-dw2101.fw
dvb-usb-dw2102.fw
dvb-usb-dw2104.fw
dvb-usb-dw3101.fw
dvb-usb-id5301.fw
dvb-usb-id5520se.fw
dvb-usb-id5580.fw
dvb-usb-id5590.fw
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw
dvb-usb-p1100.fw
dvb-usb-p1100-old.fw
dvb-usb-p7500.fw
dvb-usb-pctv-400e-01.fw
dvb-usb-pctv-450e-01.fw
dvb-usb-pctv-452e-01.fw
dvb-usb-s620.fw
dvb-usb-s630.fw
dvb-usb-s660.fw
dvb-usb-sb340.fw
dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw
dvb-usb-tbs5520-01.fw
dvb-usb-tbsqbox-dvbc.fw
dvb-usb-tbsqbox-id2601.fw
dvb-usb-tbsqbox-id5220.fw
dvb-usb-tbsqbox-id5520.fw
dvb-usb-tbsqbox-id5680.fw
dvb-usb-tbsqbox-id5880.fw
dvb-usb-tbsqbox-id5881.fw
dvb-usb-tbsqbox-id5910.fw
dvb-usb-tbsqbox-id5920.fw
dvb-usb-tbsqbox-id5921.fw
dvb-usb-tbsqbox-id5922.fw
dvb-usb-tbsqbox-id5923.fw
dvb-usb-tbsqbox-id5925.fw
dvb-usb-tbsqbox-id5927.fw
dvb-usb-tbsqbox-id5928.fw
dvb-usb-tbsqbox-id5980.fw
dvb-usb-terratec-h5-drxk.fw
dvb-usb-terratec-h7-az6007.fw
dvb-usb-terratec-h7-drxk.fw
dvb-usb-tt-s2400-01.fw
dvb-usb-umt-010-02.fw
dvb-usb-vp702x-01.fw
dvb-usb-vp7045-01.fw
dvb-usb-wt220u-01.fw
dvb-usb-wt220u-02.fw
sms1xxx-hcw-55xxx-dvbt-02.fw
sms1xxx-hcw-55xxx-isdbt-02.fw
sms1xxx-nova-a-dvbt-01.fw
sms1xxx-nova-b-dvbt-01.fw
sms1xxx-stellar-dvbt-01.fw
v4l-cx231xx-avcore-01.fw
v4l-cx23418-apu.fw
v4l-cx23418-cpu.fw
v4l-cx23418-dig.fw
v4l-cx23885-avcore-01.fw
v4l-cx23885-enc-broken.fw
v4l-cx23885-enc.fw
v4l-cx25840.fw
make -C /home/pi/media_build/v4l distclean
make[1]: Entering directory '/home/pi/media_build/v4l'
rm -f *~ *.o *.ko .*.o.cmd .*.ko.cmd *.mod.c av7110_firm.h fdump \
        config-compat.h Module.symvers Module.markers modules.order \
        *.unsigned .*.ko.unsigned.cmd
make -C firmware clean
make[2]: Entering directory '/home/pi/media_build/v4l/firmware'
make[2]: Nothing to be done for 'clean'.
make[2]: Leaving directory '/home/pi/media_build/v4l/firmware'
rm -f .version .*.o.flags .*.o.d *.mod.gcno Makefile.media \
        Kconfig Kconfig.kern .config .config.cmd .myconfig \
        .kconfig.dep config-mycompat.h
rm -rf .tmp_versions .tmp*.ver .tmp*.o .*.gcno .cache.mk
rm -f scripts/lxdialog scripts/kconfig
make -C firmware distclean
make[2]: Entering directory '/home/pi/media_build/v4l/firmware'
make[2]: Nothing to be done for 'distclean'.
make[2]: Leaving directory '/home/pi/media_build/v4l/firmware'
make[1]: Leaving directory '/home/pi/media_build/v4l'
make -C /home/pi/media_build/v4l stagingconfig
make[1]: Entering directory '/home/pi/media_build/v4l'
No version yet, using 4.14.98-v7+
make[2]: Entering directory '/home/pi/media_build/linux'
Syncing with dir ../../media
Can't find ../../media/Makefile at ./use_dir.pl line 287.
Makefile:132: recipe for target 'apply_patches' failed
make[2]: *** [apply_patches] Error 2
make[2]: Leaving directory '/home/pi/media_build/linux'
Makefile:391: recipe for target 'stagingconfig' failed
make[1]: *** [stagingconfig] Error 2
make[1]: Leaving directory '/home/pi/media_build/v4l'
Makefile:26: recipe for target 'stagingconfig' failed
make: *** [stagingconfig] Error 2
V4L drivers building...
make -C /home/pi/media_build/v4l
make[1]: Entering directory '/home/pi/media_build/v4l'
scripts/make_makefile.pl
Updating/Creating .config
make[2]: Entering directory '/home/pi/media_build/linux'
make[2]: Entering directory '/home/pi/media_build/linux'
Syncing with dir ../../media
Can't find ../../media/Makefile at ./use_dir.pl line 287.
Syncing with dir ../../media
Can't find ../../media/Makefile at ./use_dir.pl line 287.
Makefile:132: recipe for target 'apply_patches' failed
make[2]: *** [apply_patches] Error 2
make[2]: Leaving directory '/home/pi/media_build/linux'
Makefile:132: recipe for target 'apply_patches' failed
make[2]: *** [apply_patches] Error 2
make[2]: Leaving directory '/home/pi/media_build/linux'
Preparing to compile for kernel version 4.14.98
File not found: /lib/modules/4.14.98-v7+/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.
Updating/Creating .config
make[2]: Entering directory '/home/pi/media_build/linux'
make[2]: Entering directory '/home/pi/media_build/linux'
Syncing with dir ../../media
Can't find ../../media/Makefile at ./use_dir.pl line 287.
Syncing with dir ../../media
Makefile:132: recipe for target 'apply_patches' failed
make[2]: *** [apply_patches] Error 2
make[2]: Leaving directory '/home/pi/media_build/linux'
Can't find ../../media/Makefile at ./use_dir.pl line 287.
Makefile:132: recipe for target 'apply_patches' failed
make[2]: *** [apply_patches] Error 2
make[2]: Leaving directory '/home/pi/media_build/linux'
Preparing to compile for kernel version 4.14.98
File not found: /lib/modules/4.14.98-v7+/build/.config at ./scripts/make_kconfig.pl line 33, <IN> line 4.
make[1]: *** No rule to make target '.config', needed by '.myconfig'.  Stop.
make[1]: Leaving directory '/home/pi/media_build/v4l'
Makefile:26: recipe for target 'all' failed
make: *** [all] Error 2
V4L drivers installing...
make -C /home/pi/media_build/v4l install
make[1]: Entering directory '/home/pi/media_build/v4l'
Installing kernel modules under /lib/modules/4.14.98-v7+/kernel/drivers/media/:
/sbin/depmod -a 4.14.98-v7+
make -C firmware install
make[2]: Entering directory '/home/pi/media_build/v4l/firmware'
Installing firmwares at /lib/firmware:
make[2]: Leaving directory '/home/pi/media_build/v4l/firmware'
make[1]: Leaving directory '/home/pi/media_build/v4l'
V4L drivers installation done
You need to reboot...

[xiaocao]

hi ,
please follow the steps .
1) download the kernel header file
#apt-get install raspberrypi-kernel-headers
2) download some soft
#apt-get install patchutils
#apt-get install libproc-processtable-perl
3) download offline TBS driver package:
#wget http://www.tbsdtv.com/download/document/linux/media_build-2019-04-15-rpi.tar.bz2
#sudo rm -rf /lib/modules/`uname -r`/kernel/drivers/media/
#tar jxvf media_build-2019-04-15-rpi.tar.bz2
#cd media_build
#./install.sh
#reboot

if also has issue , please write email to support<support@tbsdtv.com> .

best regards!

[klosz007]

Will this work with new RPi 4B and Raspbian Buster ?

[hagaygo]

Hi

I did the above instruction, also posted the problem on github page, no response there yet (https://github.com/tbsdtv/linux_media/issues/177)

After the driver install the TBS5522SE seem to work fine.

Because it only works on raspbian stretch release from april 2019 the user needs to first (before any package update/install):

apt-get install raspberrypi-kernel-headers

to get the correct version kernel headers, then to instruct raspbian not to update kernel related stuff :

apt-mark hold raspberrypi-kernel
apt-mark hold linux-image-3.10-3-rpi
apt-mark hold raspberrypi-kernel-headers

only then install the drivers.

My problem now is that after this install my other tuners doesnt work :

[ 140.462636] usb 1-1.5: new high-speed USB device number 6 using dwc_otg
[ 140.597103] usb 1-1.5: New USB device found, idVendor=048d, idProduct=9006
[ 140.597119] usb 1-1.5: New USB device strings: Mfr=1, Product=0, SerialNumber=3
[ 140.597130] usb 1-1.5: Manufacturer: ITE Technologies, Inc.
[ 140.597140] usb 1-1.5: SerialNumber: AF0102020700001
[ 140.610889] input: ITE Technologies, Inc. as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:048D:9006.0001/input/input0
[ 140.673532] hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc.] on usb-3f980000.usb-1.5/input1
[ 140.741998] dvb_usb_af9035: disagrees about version of symbol rc_keydown
[ 140.742023] dvb_usb_af9035: Unknown symbol rc_keydown (err -22)
[ 140.802817] dvb_usb_af9035: disagrees about version of symbol rc_keydown
[ 140.802839] dvb_usb_af9035: Unknown symbol rc_keydown (err -22)

[ 456.619501] usb 1-1.5: new high-speed USB device number 7 using dwc_otg
[ 456.759801] usb 1-1.5: New USB device found, idVendor=15f4, idProduct=0131
[ 456.759819] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 456.759830] usb 1-1.5: Product: dvbt2
[ 456.759840] usb 1-1.5: Manufacturer: astrometadvbt2
[ 456.817634] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_set_idle
[ 456.817657] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_set_idle (err -22)
[ 456.817707] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_handle
[ 456.817716] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_handle (err -22)
[ 456.817830] dvb_usb_rtl28xxu: disagrees about version of symbol rc_keydown
[ 456.817839] dvb_usb_rtl28xxu: Unknown symbol rc_keydown (err -22)
[ 456.817927] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_store_with_filter
[ 456.817936] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_store_with_filter (err -22)
[ 456.879650] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_set_idle
[ 456.879668] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_set_idle (err -22)
[ 456.879715] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_handle
[ 456.879724] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_handle (err -22)
[ 456.879833] dvb_usb_rtl28xxu: disagrees about version of symbol rc_keydown
[ 456.879842] dvb_usb_rtl28xxu: Unknown symbol rc_keydown (err -22)
[ 456.879926] dvb_usb_rtl28xxu: disagrees about version of symbol ir_raw_event_store_with_filter
[ 456.879937] dvb_usb_rtl28xxu: Unknown symbol ir_raw_event_store_with_filter (err -22)

Before driver install :

[ 60.582512] usb 1-1.4.2: new high-speed USB device number 9 using dwc_otg
[ 60.716768] usb 1-1.4.2: New USB device found, idVendor=048d, idProduct=9005, bcdDevice= 2.00
[ 60.716789] usb 1-1.4.2: New USB device strings: Mfr=1, Product=0, SerialNumber=3
[ 60.716801] usb 1-1.4.2: Manufacturer: ITE Technologies, Inc.
[ 60.716813] usb 1-1.4.2: SerialNumber: AF0102020700001
[ 60.720105] dvb_usb_af9035 1-1.4.2:1.0: prechip_version=83 chip_version=01 chip_type=9135
[ 60.729964] usb 1-1.4.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in cold state
[ 60.731778] usb 1-1.4.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-01.fw'
[ 60.869561] dvb_usb_af9035 1-1.4.2:1.0: firmware version=12.54.14.0
[ 60.869611] usb 1-1.4.2: dvb_usb_v2: found a 'ITE 9135(9005) Generic' in warm state
[ 60.869628] dvb_usb_af9035 1-1.4.2:1.0: [0] overriding tuner from 00 to 38
[ 60.870489] usb 1-1.4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 60.870637] dvbdev: DVB: registering new adapter (ITE 9135(9005) Generic)
[ 60.909827] af9033 5-001c: firmware version: LINK 12.54.14.0 - OFDM 2.47.14.0
[ 60.909851] af9033 5-001c: Afatech AF9033 successfully attached
[ 60.910036] usb 1-1.4.2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
[ 60.934348] it913x it9133ax-tuner.0.auto: ITE IT913X AX successfully attached
[ 60.947025] Registered IR keymap rc-it913x-v2
[ 60.947374] rc rc1: ITE 9135(9005) Generic as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.2/rc/rc1
[ 60.947711] input: ITE 9135(9005) Generic as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.2/rc/rc1/input2
[ 60.948305] rc rc1: lirc_dev: driver dvb_usb_af9035 registered at minor = 1, scancode receiver, no transmitter

Please help , i need the other tuners to work also , not only TBS tuner.

Thanks in advance.

[hagaygo]

Although there is no response yet, i found another problem.

While my TBS 5520SE works with the drivers posted here , the DVBS tuner works fine and also the DVBT/T2 tuner works fine , but not at the same time.

So not only i can not use my other tuners while using this driver , the device which is multi tuner can not also server as 2 tuners.

My current solution is to attach it to a dedicated RPI and using the tuner via SAT>IP , not the most elegant solution , but it seems to be the best with the current driver support

[DVB]

That's a misunderstanding. 5520SE is multistandard tuner, but not dual or not multituner. It has got ONE multistandard tuner, that can be switched between multiple standards, but cannot use multiple standards at the same time, because there is only one tuner there.
I think that all USB multistandard models have got one tuner. Multistandard models for PCI-e have got dual (6590) and quad (6504) versions.

[hagaygo]

Thanks for the answer and the clear up about the 5520SE model.

Any help/pointers about making TBS driver "co-exists" with other tuners ?

The only reason i even tried the to use the TBS5520 dvb-t tuner is because i can not use my existing dvb-t tuners with it.

[steven]

update package for the Raspbian on Raspberry Pi 4B (support kernel upto 5.4) package :
http://www.tbsdtv.com/download/document/linux/media_build-rpi-2020-01-02.tar.bz2

[bccrew]

update package for the Raspbian on Raspberry Pi 4B (support kernel upto 5.4) package :
http://www.tbsdtv.com/download/document/linux/media_build-rpi-2020-01-02.tar.bz2

Hello Steven,

TBS5881 does not lock signal for QAM256 SR6875 on raspbian buster on rpi4. There was a commit to the driver in 2018 to si2168.c that fixed the problem on x64 Ubuntu kernel 4.4.0-116 but it seems that some parts were removed in the driver code?

2018 fix:
https://github.com/tbsdtv/linux_media/c ... e24b88d0ec

I tried to fix with adding a patch but still doesn't work.

Code: Select All Code

   cmd_init(&cmd, "\x14\x00\x08\x10\xdf\x17", 6, 4);
   cmd.args[4] = dev->ts_clock_inv ? 0xdf : 0xcf;
   cmd.args[5] = dev->ts_clock_inv ? 0x17 : 0x33;
   ret = si2168_cmd_execute(client, &cmd);
   if (ret)
      goto err;