Hi all
sorry for my english is not my first language;)
the problem what i have with MOI after upgrae to 2.0 or 2.0.1 :
i follow the instruction how to upgrade from 1.2.1
copied file to microSD card
conected RS
typed 2 setevn command then save and "re" after this i got: log
OK
U-Boot 1.3.4 (Mar 7 2013 - 16:38:41) for MOI2900
CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MOI2900
I2C: i2c1_init GPD1CON
ready
DRAM: 512 MB
Flash: 8 MB
SD/MMC: 7580MB
NAND: 256 MB
start normally!
MAC address: 00:22:ab:80:04:38
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
Hit any key to stop autoboot: 0
MOI2900 # setenv loadmmcfs 'fatload mmc 0:1 40000000 MOI2900_fs.bin'
MOI2900 # setenv updatekfs 'nand erase 50c0000;nand write.yaffs 40000000 50c0000 ${filesize}'
MOI2900 # save
Saving Environment to SMDK bootable device...
Erasing Nand...
Writing to Nand...
Saved enviroment variables
MOI2900 # re
reset...
OK
U-Boot 1.3.4 (Mar 7 2013 - 16:38:41) for MOI2900
CPU: S5PV210@1000MHz(OK)
APLL = 1000MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
MPLL = 667MHz, EPLL = 80MHz
HclkDsys = 166MHz, PclkDsys = 83MHz
HclkPsys = 133MHz, PclkPsys = 66MHz
SCLKA2M = 200MHz
Serial = CLKUART
Board: MOI2900
I2C: i2c1_init GPD1CON
ready
DRAM: 512 MB
Flash: 8 MB
SD/MMC: 7580MB
NAND: 256 MB
start normally!
MAC address: 00:22:ab:80:04:38
In: serial
Out: serial
Err: serial
checking mode for fastboot ...
Hit any key to stop autoboot: 0
Partition1: Start Address(0x2000), Size(0xecc000)
reading MOI2900_k_bk.bin
** Unable to read "MOI2900_k_bk.bin" from mmc 0:1 **
Partition1: Start Address(0x2000), Size(0xecc000)
reading MOI2900_fs_bk.bin
** Unable to read "MOI2900_fs_bk.bin" from mmc 0:1 **
Partition1: Start Address(0x2000), Size(0xecc000)
reading MOI2900_k.bin
** Unable to read "MOI2900_k.bin" from mmc 0:1 **
Partition1: Start Address(0x2000), Size(0xecc000)
reading MOI2900_fs.bin
The input address don't need a virtual-to-physical translation : 40000000
The input address don't need a virtual-to-physical translation : 41fffe00
The input address don't need a virtual-to-physical translation : 43fffc00
The input address don't need a virtual-to-physical translation : 45fffa00
The input address don't need a virtual-to-physical translation : 46170000
102199680 bytes read
NAND erase: device 0 offset 0x50c0000, size 0xaf40000
Skipping bad block at 0x06440000
Skipping bad block at 0x06d40000
Skipping bad block at 0x08c20000
Skipping bad block at 0x08f20000
Skipping bad block at 0x09200000
Skipping bad block at 0x0c680000
Skipping bad block at 0x0c860000
Skipping bad block at 0x0f640000
Erasing at 0xffe0000 -- 100% complete.
OK
NAND write: device 0 offset 0x50c0000, size 0x6177180
Bad block at 0x6440000 in erase block from 0x6440000 will be skipped
Bad block at 0x6d40000 in erase block from 0x6d40000 will be skipped
Bad block at 0x8c20000 in erase block from 0x8c20000 will be skipped
Bad block at 0x8f20000 in erase block from 0x8f20000 will be skipped
Bad block at 0x9200000 in erase block from 0x9200000 will be skipped
Writing data at 0xafe2800 -- 100% complete.
102199680 bytes written: OK
NAND read: device 0 offset 0x48c0000, size 0x400000
Main area read (32 blocks):
4194304 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Welcome to Moi
Moi login:
after this MOI boot ok can connect to WEBinterface but only at 192.168.1.188 service like VDR or VDRadmin not running tvheadend not running
canot connect to 192.168.1.188:8001 nothing happens timed out
on WEBinterface i see still version 1.2.1 what is this? and how to do proper update
Have try to connecting thru XBMC to MOI without success ( vdr not running)
dmesg log
http://pastebin.com/VsYVWNV2