Second: I doubt that it's possible to use C and T2 at the same time with the current driver architecture and only one presented tuner. Because the driver defines, what kind of devices/standards you are able to use and the driver currently only provides one standard at the same time per installed tuner. And as it's a dual-tuner and not two single tuners, you can only select the drivers for both. Until changes in the driver architecture*, you are limited to either DVB-T2 OR DVB-C per tuner (-> device manager)/installed TBS6280 card. That's how I understand it.superman2012 Wrote:But if with a 6280 card now, can I use DVB-T2 for tuner A and DVB-C for tuner B?
* = I'm not an expert for drivers and tuners, but the problem as I see it, is that you must be able to select the standard per "virtual tuner". That may be done by adressing each of the two as seperate devices (you would then have two entries in the device manager). But as it is a single physical dual-tuner, I doubt that's possible. And it would be very static, as you would need to change the driver to change the selected standard (and most probably restart afterwards). Another way would be a driver that combines both and switches dynamically. That would be more convenient, but also increase the complexity of the driver (thus the possibility of errors and needed time for testing).