I'm not able to setup DVB-C with 5881. I have a MatrixTv V21 Hardware and using TBS-MatrixTV-V1.0.1.0.zip from date 2014-09-03 as TBS-MatrixTV-V1.0.1.1.zip is corrupted. Connecting my tbs5881 on Ubuntu 14.04 and using the newest linux drivers provided by TBS tbs5881 is working. I wonder why tbs5881 is sold in combination with MatrixTV as it is not working and there is no hint that tbs5881 DVB-C is not working. See
https://www.tbs-technology.de/shop/prod ... ucts_id=46 (
I copied the firmware from my debian-system to Matrixtv in /firmware/dvb-usb-tbsqbox-id5881.fw
dmesg shows the following on MatrixTV:
dvb-usb: found a 'TBS 5881 CI USB2.0' in cold state, will try to load a firmware
tbs5881: TBS5881 firmware init
tbs5881: start downloading TBS5881 firmware
dvb-usb: found a 'TBS 5881 CI USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TBS 5881 CI USB2.0)
dvb-usb: MAC address: 00:22:ab:b1:03:d5
tbs5881fe: demod attach failed
tbs5881: Attached TBS5881FE!
tbs5881: CI initialized.
tbs5881: CI disabled.
DVB: registering adapter 0 frontend 0 (TurboSight TBS 5881 DVBC frontend)...
input: IR-receiver inside an USB DVB receiver as /devices/platform/fsl-ehci.1/us
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TBS 5881 CI USB2.0 successfully initialized and connected.
But w_scan gives no result on Matrixtv
w_scan version 20130331 (compiled for DVB API 5.3)
,,,
Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.3
frontend 'TurboSight TBS 5881 DVBC frontend' supports
INVERSION_AUTO
QAM_AUTO
FEC_AUTO not supported, trying FEC_NONE.
FREQ (42.00MHz ... 1002.00MHz)
SRATE (1.000MSym/s ... 7.200MSym/s)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
updating transponder list..
QAM_256 f = 114000 kHz S6900C0: (time: 00:10) (time: 00:13)
QAM_64 f = 122000 kHz S6900C0: (time: 00:14) (time: 00:17)
....
tune to: QAM_256 f = 626000 kHz S6900C0 (no signal)
(time: 02:42) >>> tuning status: 0x00 (NO LOCK)
>>> tuning status: 0x00 (NO LOCK)
>>> tuning status: 0x00 (NO LOCK)
>>> tuning status: 0x00 (NO LOCK)
>>> tuning status: 0x00 (NO LOCK)
----------no signal----------
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
On my ubuntu system I get the following with w_scan -I <inifile>
w_scan version 20130331 (compiled for DVB API 5.3)
.....
output charset 'UTF-8', use -C <charset> to override
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.3
frontend 'TurboSight TBS 5881 DVBC frontend' supports
INVERSION_AUTO
QAM_AUTO
FEC_AUTO not supported, trying FEC_NONE.
FREQ (42.00MHz ... 1002.00MHz)
SRATE (1.000MSym/s ... 7.200MSym/s)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
updating transponder list..
QAM_256 f = 114000 kHz S6900C0: (time: 00:10) (time: 00:12) signal ok
updating transponder:
(QAM_256 f = 530000 kHz S6900C0) 0x0000
to (QAM_256 f = 530000 kHz S6900C0) 0x4044
updating transponder:
(QAM_256 f = 618000 kHz S6900C0) 0x0000
to (QAM_256 f = 618000 kHz S6900C0) 0x4044
updating transponder:
....
Is there a plan for an update on matrixtv with a working DVB-C for tbs-5881?