vpeter Wrote:What you get when running autostart manually:And does remote now works or still not?
- Code: Select All Code
sh /storage/.config/autostart.sh
Running autostart.sh manually :
- Code: Select All Code
MatrixELEC:~/.config # ./autostart.sh: line 19: progress: not found
./autostart.sh: line 19: progress: not found
Old keytable cleared
Read tbs_nec table
Wrote 34 keycode(s) to driver
Protocols changed to NEC LIRC other
MatrixELEC:~/.config # ls /sys/class/rc
rc0
MatrixELEC:~/.config # ls -l /sys/class/rc
total 0
lrwxrwxrwx 1 root root 0 Jan 1 1970 rc0 -> ../../devices/soc0/ir-receiver.17/rc/rc0
Remote is not responding.
vpeter Wrote:Can you run in ssh console command mode2. Does it return something like this
- Code: Select All Code
OpenELEC:~ # mode2
pulse 9036
space 4546
pulse 546
space 581
pulse 554
space 582
pulse 554
space 585
pulse 553
space 581
pulse 555
Execute mode2 command in ssh but no code display while pressing remote keys (UP, RIGHT, DOWN, LEFT then ENTER/OK)