I have TBS6991SE and module TrophyAccess:
http://trophy.com.ua/files/CAM_en.pdfI have tried with MOI+ and PC (i686 x64), both results are similar.
Looks like this module and card is not compatible each other (driver problem).
I have tried several softwares like mumudvb, dvblas and astra, results are similar:
mumudvb replay:
Info: Main: Channel number : 0, name : "A3" service id 7702
Info: Main: Multicast4 ip : 239.255.0.3:10003
Info: Main: Channel "A3" is now highly scrambled (100% of scrambled packets). Card 1
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
WARN: CAM: Transport Layer Error change from EN50221ERR_NONE (No Error.) to EN50221ERR_CAWRITE (error during write to CA device.)
Info: CAM: No CAM initialization in 30s, WE FORCE A RESET. try 1 on 5.
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
Info: CAM: No CAM initialization in 61s, WE FORCE A RESET. try 2 on 5.
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
Info: CAM: No CAM initialization in 92s, WE FORCE A RESET. try 3 on 5.
en50221_tl_poll: CAWrite failed
en50221_stdcam_llci_poll: Error reported by stack:-2
astra replay:
Jun 25 11:53:20 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:21 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:21 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:21 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
Jun 25 11:53:23 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:24 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:24 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:24 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
Jun 25 11:53:26 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:27 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:27 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:27 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
Jun 25 11:53:30 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:30 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:31 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:31 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
Jun 25 11:53:33 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:34 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:34 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:34 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
Jun 25 11:53:37 [dvb_ca 10:0] CA: Slot 0 ready to go
Jun 25 11:53:37 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:38 [dvb_ca 10:0] CA: Slot 0 write failed [Input/output error]
Jun 25 11:53:38 [dvb_ca 10:0] CA: Slot 0 failed to send poll command. reset slot
dvblast replay:
error: en50221: cannot write to CAM device (Input/output error)
error: en50221_Init: couldn't send TPDU on slot 0
error: en50221: cannot write to CAM device (Input/output error)
error: en50221_Init: couldn't send TPDU on slot 0
error: en50221: cannot write to CAM device (Input/output error)
error: en50221_Init: couldn't send TPDU on slot 0
Same time this module works perfect in TV and in alternate STB.
Any solution for me?