Hi
Recently I have purchased TBS S5922SE DVB-S2 USB tuner from www.buydvb.net.
The tuner is working fine with single Ku-band LNB and DVB Dream on my Windows 10 64-bit OS PC.
But recently I have added another Ku-band LNB with a Diseqc 2.0 4x1 switch.
LNB1 attached to Port-1 and LNB2 is attached to Port-2.
Now in DVB Dream (v 2.7.4) only LNB1 is working and LNB2 is not working.
Means DVB Dream shows the signal and also locks it too, but shows no channels found !!!!
Also if I have scanned the channels earlier, it does not play/render the channel of LNB2.
Please help, seems like I have bought a faulty/sub-standard tuner from TBS