is there any way to change the delivery system from DVB-S/S2 to DVB-T/T2 in TBS5520 with v170206 drivers? Or only is supported DVB-S/S2 in these drivers?
Additional info:
- Code: Select All Code
$ dmesg | grep TBS
[ 4.388170] TBS version 160405
[ 4.389320] dvb-usb: found a 'TBS 5520 USB2.0' in cold state, will try to load a firmware
[ 4.498852] dvb-usb: found a 'TBS 5520 USB2.0' in warm state.
[ 4.499005] DVB: registering new adapter (TBS 5520 USB2.0)
[ 4.502044] TurboSight TBS 5520 Frontend Attaching...
[ 4.502049] dvb-usb: no frontend was attached by 'TBS 5520 USB2.0'
[ 4.502140] dvb-usb: TBS 5520 USB2.0 successfully initialized and connected.
[ 4.535252] dvb-usb: TBS 5520 USB2.0 successfully deinitialized and disconnected.
[ 6.279211] usb 3-2: Product: TBS 5520
[ 6.279213] usb 3-2: Manufacturer: TBS-Tech
[ 6.279676] dvb-usb: found a 'TBS 5520 USB2.0' in cold state, will try to load a firmware
[ 6.386858] dvb-usb: found a 'TBS 5520 USB2.0' in warm state.
[ 6.387126] DVB: registering new adapter (TBS 5520 USB2.0)
[ 6.573482] TurboSight TBS 5520 Frontend Attaching...
[ 12.673238] DVB: registering adapter 0 frontend 0 (TurboSight TBS 5520FE DVBS/S2 frontend)...
[ 12.673569] dvb-usb: TBS 5520 USB2.0 successfully initialized and connected.
$ dmesg | grep tbs
[ 4.389640] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5520.fw'
[ 4.389641] tbs5520: start downloading tbs5520 firmware
[ 4.498847] tbs5520: end downloading tbs5520 firmware
[ 4.499006] tbs5520: read eeprom failed.
[ 4.502162] usbcore: registered new interface driver tbs5520
[ 6.279699] dvb-usb: downloading firmware from file 'dvb-usb-tbsqbox-id5520.fw'
[ 6.279700] tbs5520: start downloading tbs5520 firmware
[ 6.386849] tbs5520: end downloading tbs5520 firmware
[ 10.341773] tbs5520fe: Initialized
[ 12.673079] tbs5520: Attached tbs5520FE!
$ lsusb | grep TBS
Bus 003 Device 008: ID 734c:5520 TBS Technologies China
$ uname -a
Linux marine06 4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
$ dvb-fe-tool
Device TurboSight TBS 5520FE DVBS/S2 frontend (/dev/dvb/adapter0/frontend0) capabilities:
CAN_2G_MODULATION
CAN_FEC_1_2
CAN_FEC_2_3
CAN_FEC_3_4
CAN_FEC_4_5
CAN_FEC_5_6
CAN_FEC_6_7
CAN_FEC_7_8
CAN_FEC_AUTO
CAN_INVERSION_AUTO
CAN_QPSK
CAN_RECOVER
DVB API Version 5.3, Current v5 delivery system: DVBS
Supported delivery systems:
[DVBS]
DVBS2
Warning: new delivery systems like ISDB-T, ISDB-S, DMB-TH, DSS, ATSC-MH will be miss-detected by a DVBv5.4 or earlier API call
DiSEqC VOLTAGE: OFF
ERROR FE_SET_VOLTAGE: Operación no permitida
Thanks.