surfplanet Wrote:Hello,
Splitter will NOT work since the card send the switching voltage for H/V and 22kHz signal for H/L band on it's outputs.
You've to connect the LNB to the right inputs and can then use all eight tuners for the connected inputs.
If you use splitter and tune to the wrong polarisation something bad might happen
Reagrd's
Elmar
Hi,
I don't get it, if I plug only one cable (on the right connector ?), I will be able to use all 8 tuners with the same Pola/Freq?
If so what mode is it ?
EDIT: What I meant is this, from TVH doc
Master Tuner : Select the master tuner.
The signal from the standard universal LNB can be split using a simple coaxial splitter (no multiswitch) to several outputs. In this case, the position, the polarization and low-high band settings must be equal.
If you set other tuner as master, then this tuner will act like a slave one and tvheadend will assure that this tuner will not use incompatible parameters (position, polarization, lo-hi).