How to use TBS6304 in MOI PRO AMD ?
Instructions found seem to be for TBS6301 card and do not apply to TBS6304.
(TBS6304 has different utility program)
esimotas Wrote:How to use TBS6304 in MOI PRO AMD ?
Instructions found seem to be for TBS6301 card and do not apply to TBS6304.
(TBS6304 has different utility program)
[root@localhost]# ./TBSLocalConfigurationTool -i
64 bit
0. TBS6304 Capture0 ,(adapture 10 frontend 0)
1. TBS6304 Capture1 ,(adapture 11 frontend 0)
2. TBS6304 Capture2 ,(adapture 8 frontend 0)
3. TBS6304 Capture3 ,(adapture 9 frontend 0)
Please select device's number:(default 0)
0
input format: 1920*1080P 50HZ
[root@localhost]# /usr/bin/dvblast -f 11494000 -s 22000000 -v 18 -a 8 -n 0
DVBlast 3.1 (git-3.0-19-g8ad3fd6-dirty)
warning: restarting
debug: compiled with DVB API version 5.10
debug: using DVB API version 5.11
debug: Frontend "TurboSight TBS 6304 HDMI Capture " supports:
debug: frequency min: 950000, max: 2150000, stepsize: 0, tolerance: 0
debug: symbolrate min: 1000000, max: 45000000, tolerance: 0
debug: capabilities:
debug: INVERSION_AUTO
debug: FEC_1_2
debug: FEC_2_3
debug: FEC_3_4
debug: FEC_4_5
debug: FEC_5_6
debug: FEC_6_7
debug: FEC_7_8
debug: FEC_AUTO
debug: QPSK
debug: 2G_MODULATION
debug: FE_CAN_RECOVER
debug: delivery systems:
debug: DVBS
debug: DVBS2
debug: frequency 11494000 is in Ku-band (lower)
debug: configuring LNB to v=18 p=0 satnum=0 uncommitted=0
debug: tuning DVB-S frontend to f=11494000 srate=22000000 inversion=-1 fec=999 rolloff=35 modulation=legacy pilot=-1 mis=0
warning: failed opening CAM device /dev/dvb/adapter8/ca0 (No such file or directory)
debug: setting filter on PID 0
debug: setting filter on PID 16
debug: setting filter on PID 17
debug: setting filter on PID 18
debug: setting filter on PID 19
debug: setting filter on PID 20
error: no config file
debug: frontend has acquired signal
debug: frontend has acquired carrier
debug: frontend has acquired stable FEC
debug: frontend has acquired sync
info: frontend has acquired lock
lock status: 1
debug: - Bit error rate: 0
debug: - Signal strength: 62940
debug: - SNR: 26896
debug: new NIT actual networkid=1 version=0
debug: - desc 40 networkname="TBS Capture"
debug: * ts tsid=10 onid=1
debug: end NIT
debug: new PAT tsid=0 version=0
debug: * NIT pid=16
debug: * program number=1 pid=16
debug: end PAT
warning: invalid PAT section received on PID 18
error type: invalid_pat_section
warning: invalid PAT section received on PID 18
error type: invalid_pat_section
debug: new PMT program=1 version=0 pcrpid=17
debug: * ES pid=18 streamtype=0x1b streamtype_txt="H.264/14496-10 video (MPEG-4/AVC)"
debug: * ES pid=19 streamtype=0x03 streamtype_txt="11172-3 audio (MPEG-1)"
debug: end PMT
esimotas Wrote:Thank you
I was able to get a stream from the encoder but have the following issues:
Adapters are not in order
- Code: Select All Code
[root@localhost]# ./TBSLocalConfigurationTool -i
64 bit
0. TBS6304 Capture0 ,(adapture 10 frontend 0)
1. TBS6304 Capture1 ,(adapture 11 frontend 0)
2. TBS6304 Capture2 ,(adapture 8 frontend 0)
3. TBS6304 Capture3 ,(adapture 9 frontend 0)
Please select device's number:(default 0)
0
input format: 1920*1080P 50HZ
I get signal input on Encoder 0 which appears as adapter 10 - however with dvblast i get the stream at adapter 8 not adapter 10 (i only have one hdmi input on the first port of the card):
- Code: Select All Code
[root@localhost]# /usr/bin/dvblast -f 11494000 -s 22000000 -v 18 -a 8 -n 0
DVBlast 3.1 (git-3.0-19-g8ad3fd6-dirty)
warning: restarting
debug: compiled with DVB API version 5.10
debug: using DVB API version 5.11
debug: Frontend "TurboSight TBS 6304 HDMI Capture " supports:
debug: frequency min: 950000, max: 2150000, stepsize: 0, tolerance: 0
debug: symbolrate min: 1000000, max: 45000000, tolerance: 0
debug: capabilities:
debug: INVERSION_AUTO
debug: FEC_1_2
debug: FEC_2_3
debug: FEC_3_4
debug: FEC_4_5
debug: FEC_5_6
debug: FEC_6_7
debug: FEC_7_8
debug: FEC_AUTO
debug: QPSK
debug: 2G_MODULATION
debug: FE_CAN_RECOVER
debug: delivery systems:
debug: DVBS
debug: DVBS2
debug: frequency 11494000 is in Ku-band (lower)
debug: configuring LNB to v=18 p=0 satnum=0 uncommitted=0
debug: tuning DVB-S frontend to f=11494000 srate=22000000 inversion=-1 fec=999 rolloff=35 modulation=legacy pilot=-1 mis=0
warning: failed opening CAM device /dev/dvb/adapter8/ca0 (No such file or directory)
debug: setting filter on PID 0
debug: setting filter on PID 16
debug: setting filter on PID 17
debug: setting filter on PID 18
debug: setting filter on PID 19
debug: setting filter on PID 20
error: no config file
debug: frontend has acquired signal
debug: frontend has acquired carrier
debug: frontend has acquired stable FEC
debug: frontend has acquired sync
info: frontend has acquired lock
lock status: 1
debug: - Bit error rate: 0
debug: - Signal strength: 62940
debug: - SNR: 26896
debug: new NIT actual networkid=1 version=0
debug: - desc 40 networkname="TBS Capture"
debug: * ts tsid=10 onid=1
debug: end NIT
debug: new PAT tsid=0 version=0
debug: * NIT pid=16
debug: * program number=1 pid=16
debug: end PAT
warning: invalid PAT section received on PID 18
error type: invalid_pat_section
warning: invalid PAT section received on PID 18
error type: invalid_pat_section
debug: new PMT program=1 version=0 pcrpid=17
debug: * ES pid=18 streamtype=0x1b streamtype_txt="H.264/14496-10 video (MPEG-4/AVC)"
debug: * ES pid=19 streamtype=0x03 streamtype_txt="11172-3 audio (MPEG-1)"
debug: end PMT
Also although i get video there is no audio (audio is silent).
I would appreciate any help to fix this.
Return to TBS6304 Quad HD HDMI capture card
Users browsing this forum: No registered users and 0 guests