OK, the v1.0.3.2 driver doesn't crash, but... with that version I do have a problem with the CI module in the sense that it doesn't seem to descramble with the v1.0.3.2 driver. It works fine with the v1.0.3.0 driver, so I've gone back to that one again. As stated in my earlier post, I use MediaPortal, version 1.10.0 with the required TBS patch.
With the v1.0.3.0 driver I see this:
[2015-01-17 09:08:11,828] [Log ] [21 ] [DEBUG] - Turbosight: send PMT to CAM, list action = Only, command = Descrambling
[2015-01-17 09:08:11,828] [Log ] [21 ] [DEBUG] - Turbosight: is CAM ready
[2015-01-17 09:08:11,842] [Log ] [21 ] [DEBUG] - Turbosight: result = True
....
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - card: StartTimeShifting 5 T:\Timeshift\live5-0.ts
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - card: CAM enabled : True
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0 SetTimeShiftFileName:T:\Timeshift\live5-0.ts
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - Set video / audio observer
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
[2015-01-17 09:08:12,461] [Log ] [21 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
[2015-01-17 09:08:12,475] [Log ] [21 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
[2015-01-17 09:08:12,658] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,658] [Log ] [26 ] [INFO ] - audioVideoEventHandler Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - PID seen - type = Audio
[2015-01-17 09:08:12,672] [Log ] [26 ] [INFO ] - audio last seen at 17/01/2015 09:08:12
[2015-01-17 09:08:12,700] [Log ] [26 ] [INFO ] - PID seen - type = Video
[2015-01-17 09:08:12,700] [Log ] [26 ] [INFO ] - audioVideoEventHandler Video
[2015-01-17 09:08:12,700] [Log ] [21 ] [INFO ] - card: WaitForFile - video and audio are seen after 0.2249504 seconds
With the v1.0.3.2 driver I see this:
[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: send PMT to CAM, list action = Only, command = Descrambling
[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: is CAM ready
[2015-01-17 08:58:42,517] [Log ] [16 ] [DEBUG] - Turbosight: result = True
...
[2015-01-17 08:58:44,030] [Log ] [16 ] [INFO ] - card: StartTimeShifting 5 T:\Timeshift\live5-0.ts
[2015-01-17 08:58:44,030] [Log ] [16 ] [INFO ] - card: CAM enabled : True
[2015-01-17 08:58:44,046] [Log ] [16 ] [INFO ] - subch:0 SetTimeShiftFileName:T:\Timeshift\live5-0.ts
[2015-01-17 08:58:44,046] [Log ] [16 ] [INFO ] - Set video / audio observer
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
[2015-01-17 08:58:44,061] [Log ] [16 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card: WaitForFile - no audio was found after 15.0070076 seconds
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card: WaitForFile - audio and video stream is scrambled
[2015-01-17 08:58:59,068] [Log ] [16 ] [INFO ] - card TBS 5980 CI Tuner: StopTimeShifting user:KOROS sub:0