i'm trying to get the 3.14 linaro kernel up and running on the MoiPro which works for the most part, with the exception of the PCIe bus.
It sees the PCIe root complex, the pericom switch/bridge, but any cards attached to the switch only show after a bus rescan, and don't work (Tried a TBS6985, and an intel gigE adaptor)
In the 3.0.35 logs i can see some tbs modifications to the standard pci driver
- Code: Select All Code
new added delay time for Pericom bridge start
new added delay time for Pericom bridge end
Would it be possible to release the kernel/uboot sources used? and the schematics so I can wire up the correct pins in the devicetree?
Thanks